Face Management System 8+
The Face Management System is a non-contact, AI-equipped device that can quickly measure an individual's body surface temperature by simply approaching a camera.
By installing at entrances and exits of offices, stores, and event venues, it can quickly and accurately detect people at risk of overheating.
Non-contact, body surface temperature can be measured while wearing a mask. For example...
Office
Reception
Store
Event Site
Theme parks
Schools
It can also be used in various other places.
Measurement in real time is possible (0.5 sec.)
*Accurate measurement may not be possible depending on conditions such as temperature and humidity of the installation location.
Measurements are taken in 0.1 degree Celsius increments.
(Measurement error is ±0.2 degree)
Announces when high temperature is detected
(set at 37.2°C or higher)
*Supports only body surface temperature detection.
It does not support room entry/exit control, etc.
(Measurement error is ±0.2°C.)
Normal case
When high body surface temperature is detected
The body surface temperature and green check
mark will be displayed.
At the same time, an audible "Normal body temperature
" will be heard.
The body surface temperature and orange warning
mark will be displayed.
At the same time, an audible voice will say,
"Body temperature is high.
Please use the mask while wearing it.
It is hygienic because there is no need to place luggage or put on/off the mask.
Recommended for places where many people pass by, such as sporting events, various parties and event venues, and entrances to various types of stores.
They are also useful for health management of employees who come in contact with many customers.
For short-term installation, rental is available.
Stand type
This is a non-folding thermal camera with a slim stand that can be placed at the entrance of a store or other location without interfering with the entrance.
It is activated by bringing the face about 50 cm closer to the camera and measures the body surface temperature within 1 second.
In addition, the camera does not store any personal data.
Size
Total length: 141 cm
Width: 28cm
Depth: 21cm
Weight: 7kg
Desktop type
This is a non-folding, standable thermal camera that can be placed on a counter or reception desk with a stable triangular stand.
It is activated by bringing the face about 50 cm closer to the camera and measures the body surface temperature within 1 second.
In addition, the camera does not store any personal data.
Size
Total length: 44 cm
Width: 28cm
Depth: 26 cm
Weight: approx. 3 kg
Choose the desktop type to meet your needs, for example, if the stand type is too cramped or if you want to use an existing counter or reception area.
The sensor part can be changed from the pole of the stand type to a short stand for the desktop type.
(In the case of rental, the desktop type will be sent from the beginning.) The desktop type is more compact than the stand type, weighing only 3 kg, and can be easily moved from place to place.
This place...
Theme parks
At the entrance to the sporting event venue
At the reception desk of the ceremony/seminar venue
*Please use in a roofed area.
Basic Data
Terminal Length
31cm
When the stand
is set
141cm
When short stand is set
44cm
Terminal variable angle
30 degrees
Cord length
150cm
External terminal of main unit
LAN x 1, power supply x 1, USB x 2
Terminal Specifications
OS
Android7.1
CPU
RK3399
RAM
4GB
Flash memories
16GB
Monitor resolution
1920x1080
Camera
2 million pixels
Power supply (output/input)
1.2V.2A ／100V
Operating temperature
-10℃～50℃
Usable humidity
10％～90％
Temperature sensor (infrared thermal imaging)
Body surface temperature sensing distance
within 60 cm
Measurement error
±0.2°C or less
温度検査範囲
10℃～42℃
Rental Rates
*The shipping fee is a service charge only when using Sagawa Express (otherwise, a fee may be charged
Common fee for both stand type and desktop type
Per unit : 30,000 yen per week (tax not included)